4.9 Google Rating • 1,000+ Tubs
EXPERT LAWN CARE SERVICES IN AUGUSTA, GA
Stop Paying for a New Tub — Reglaze It for a Fraction of the Cost
Your bathtub, tiles, and sink can look brand new by end of day — without the mess, the wait, or the wallet-draining cost of replacement. Ottawa’s most trusted bathtub reglazing team is one call away.
Tile Refinishing Toronto
Professional Tile Reglazing Across the GTA
Your bathroom tiles refinished in one visit. We sand, bond, and apply a professional urethane acrylic coating that looks and feels like new ceramic. 3 to 5 hours, no tile removal, no demolition. Starting at $450 with a 5 year warranty. Serving Toronto, Scarborough, North York, Etobicoke, and Mississauga.
Signs Your Bathroom Tiles Need Refinishing
Not every tile problem means a full tear out. Most of the damage homeowners across Toronto, Scarborough, and North York call us about can be fixed with a single coat of professional urethane acrylic applied right over the existing tile.
Hard water deposits, rust rings around drains, and yellowed soap scum that no amount of scrubbing removes. These stains sit inside the pores of the glaze, not on top of it. Once the original factory finish wears down, cleaning products cannot reach the discolouration. Tile reglazing seals the surface with a fresh coating that covers the stains permanently.
A dropped shampoo bottle or years of thermal cycling can chip the glaze off individual tiles. The exposed ceramic underneath absorbs water, which leads to further cracking and potential mould growth behind the wall. We fill chips and hairline cracks during the sanding and prep stage before coating, so the finished surface is smooth and sealed again. Homeowners in Etobicoke, East York, and Mississauga regularly book this repair to avoid a $3,000 to $5,000 retiling job.
Pink, mint green, and baby blue tiles were standard in Toronto homes built during the 1960s through 1980s. The tiles themselves are often structurally sound, but the colour dates the entire bathroom. Tile refinishing coats the surface in a clean white finish that modernizes the room without removing a single tile. It is the fastest way to update a rental unit, condo bathroom, or family home before listing it for sale.
Decades of cleaning with abrasive pads or harsh chemical cleaners wears through the factory glaze. The tile feels rough to the touch, collects soap residue faster, and looks dull even after cleaning. This is common in older homes across Vaughan, Richmond Hill, and Brampton where the original tilework is 30 to 50 years old. Reglazing restores a smooth, glossy finish that is easy to clean and resistant to buildup.
Real estate agents across the GTA know that a clean, white bathroom photographs well and helps sell faster. Property managers in Scarborough, Ajax, and Pickering use tile reglazing between tenants to refresh the bathroom in a single day instead of scheduling a multi day renovation. The unit is back on the market within 48 hours of the coating being applied.
Dark spots that keep returning on the tile surface, even after bleaching, usually mean the old glaze has micro cracks that trap moisture. The mould grows under the finish where surface cleaners cannot reach it. Sanding the tile face removes the compromised layer, and the new urethane acrylic coating creates a sealed, non porous barrier that resists mould growth. This is one of the most common reasons homeowners in North York and Oakville book a tile resurfacing job.
Bathroom tile refinishing in Toronto. Stained and discoloured tiles restored to a factory white finish in a single visit.
Can you refinish tiles that are loose or shifting?
No. Loose tiles need to be re secured before any coating is applied. If a tile moves when you press on it, the bond between the tile and the wall has failed. We check every tile during the inspection. Tiles that are firmly attached but chipped, stained, or discoloured are ideal candidates for refinishing. Tiles that shift or rock will crack any coating applied over them within months.
Not sure if your tiles can be refinished? Send us a photo and Shawn will tell you within 24 hours.
Our Tile Reglazing Services
We refinish the wall tiles that make up the most visible surfaces in your bathroom. Every service below uses the same professional urethane acrylic coating, the same 3 to 5 hour process, and is backed by the same 5 year warranty.
Bathtub Surround Tiles
The three walls around your bathtub take the most water exposure in any bathroom. Stains, soap buildup, and chipped glaze are common in Toronto homes over 20 years old. We sand and coat the entire surround in a single visit. Homeowners in Scarborough and East York regularly pair this with a bathtub reglazing for a complete refresh.
Most PopularShower Surround Tiles
Shower stall walls, corner shower enclosures, and walk in shower tile surfaces. The constant moisture in a shower stall accelerates glaze wear faster than any other area. We coat shower wall tiles with the same urethane acrylic finish used on bathtub surrounds. Pairs well with a shower base refinishing for a full enclosure restoration.
High DemandBathroom Wall Tiles
Half height or full height wall tiles around the vanity, behind the toilet, or covering the entire bathroom. These tiles often carry the most visible colour dating in older bathrooms across North York, Mississauga, and Brampton. We coat them to match the surround for a consistent, modern white finish throughout the room.
Full Room Option
One Technician. One Visit. Every Tile Coated.
Shawn handles every tile reglazing job personally. There is no crew rotation and no subcontractors. He sands each tile with 40 grit followed by 150 grit, applies the bonding agent, sprays the urethane acrylic coating, and inspects the finished surface before packing up. Property managers across Vaughan, Richmond Hill, and Oakville book directly with Shawn because they get the same person and the same result every time.
Surfaces We Do Not Refinish
Can you refinish the tiles and the bathtub in the same visit?
Yes. Many homeowners book a bathtub reglazing and tile surround refinishing together. Both surfaces are prepped, coated, and cured at the same time. It adds about 1 to 2 hours to the total job time, and the entire bathroom is ready for use within 48 hours.
How We Refinish Your Tiles
Every tile reglazing job follows the same five step process. Shawn completes it in a single visit, start to finish, in 3 to 5 hours. No subcontractors, no return visits, no shortcuts.
Inspection and Masking
Shawn checks every tile by hand. Each one is pressed to confirm it is firmly bonded to the wall. Tiles that are loose, hollow sounding, or show signs of moisture behind them are flagged before any work starts. This step is what separates a professional job from a DIY kit where the coating peels within months because the surface underneath was never checked.
Surface Preparation and Sanding
The factory glaze on ceramic and porcelain tiles is designed to repel everything, including new coatings. Sanding removes that glaze and gives the bonding agent a surface it can grip. Shawn sands each tile with 40 grit to break through the glaze, then follows with 150 grit to smooth the surface and remove deep sanding marks.
Bonding Agent Application
A professional bonding agent is applied to the sanded surface. This is the step that makes the difference between a coating that lasts 10 to 15 years and one that peels within a year. The bonding agent creates a chemical bridge between the old tile and the new urethane acrylic layer. It is not available in retail stores and is not included in any DIY refinishing kit sold at Home Depot or Canadian Tire.
Urethane Acrylic Coating
The coating is applied using an HVLP spray gun in multiple thin passes. Each pass builds an even, smooth layer that covers the tile surface uniformly. The finished result looks and feels like new ceramic. The spray application is what gives the surface its factory finish quality. Roller and brush methods used in DIY kits leave visible texture, lap marks, and uneven coverage that real homeowners on Medium and Houzz describe as looking worse than the original tile.
Final Inspection and Cleanup
Shawn inspects every coated tile under direct light. He checks for runs, thin spots, dust inclusions, and texture inconsistencies. Any imperfection is corrected before the masking comes off. Once the inspection is complete, all plastic sheeting and tape are removed, and the bathroom is cleaned. Curing instructions are left with the homeowner: light use after 24 hours, full normal use after 48 hours.
How Much Does Tile Reglazing Cost in Toronto?
Tile reglazing starts at $450 in Toronto and the GTA. The final price depends on how many walls are being coated, the condition of the tiles, and whether you are combining it with a bathtub or shower refinishing. We quote a fixed price from a photo before you book.
What Affects the Final Price
Tile Reglazing vs. Tile Replacement Cost
| Cost Factor | Tile Reglazing | Full Tile Replacement |
|---|---|---|
| Labour and materials | $450 to $800+ | $2,000 to $5,000+ |
| Demolition and disposal | $0 (no removal) | $500 to $1,000 |
| Plumber fees | $0 (fixtures stay in place) | $300 to $600 |
| Waterproofing membrane | Not required | $200 to $500 |
| Time out of service | 48 hours | 5 to 10 days |
| Typical total cost | $450 to $800+ | $3,000 to $7,000+ |
Do you charge extra for travel outside Toronto?
No. The same pricing applies whether the job is in downtown Toronto, Scarborough, North York, Etobicoke, Mississauga, Brampton, Vaughan, Markham, Richmond Hill, Oakville, Burlington, Ajax, Pickering, or Whitby. There is no trip charge or distance surcharge anywhere within our service area.
Send a photo of your tiles and get a fixed price quote. No surprises, no hidden fees.
Refinish or Replace Your Tiles?
Tile replacement is not always the right answer, and tile reglazing is not always the right answer either. Here is an honest comparison so you can decide which one fits your bathroom, your budget, and your timeline.
When Replacement Is the Better Choice
We turn down tile reglazing jobs when the tiles are not suitable for coating. Here are the situations where a full replacement is the smarter investment.
Real Scenarios From Toronto Homeowners
Landlord in Scarborough with a tenant turnover
Pink 1970s bathroom tiles in good structural condition. All tiles firmly bonded. Needs to look clean and modern for the next tenant listing. Budget under $1,000. Unit needs to be ready within the week.
Reglazing is the right callHomeowner in North York selling in 3 months
Stained tub surround tiles with minor chipping. Tiles are solid but the colour looks dated. A $5,000 renovation does not make sense for a pre sale refresh. The bathroom just needs to photograph well.
Reglazing is the right callHomeowner in Etobicoke converting a tub to a walk in shower
Changing the entire bathroom layout. Tub being removed, new shower base going in, different tile pattern requested. The walls need to be opened for new plumbing and waterproofing.
Replacement is the right callDIY Tile Reglazing vs. Professional Refinishing
A Rust-Oleum or Homax tile kit costs $30 to $80 at Home Depot or Canadian Tire. The price is appealing. The results, according to homeowners who have used them, are not.
| Factor | DIY Kit | Professional Reglazing |
|---|---|---|
| Cost | $30 to $80 | $450 to $800+ |
| Coating type | Brush on epoxy or roll on paint | Sprayed urethane acrylic |
| Surface prep | Light scuff with included pad | 40 grit + 150 grit sanding, chip repair, bonding agent |
| Application method | Foam roller or brush | HVLP spray gun, multiple thin passes |
| Finish quality | Visible roller marks, brush strokes, uneven coverage | Smooth, glossy, factory tile appearance |
| Realistic lifespan | 6 to 12 months before peeling | 10 to 15 years with proper care |
| Warranty | None (manufacturer covers product defects only) | 5 year warranty on coating |
| Time to complete | Full weekend (multiple coats, long dry times) | 3 to 5 hours, single visit |
What Homeowners Actually Report After Using DIY Kits
These are real experiences shared by homeowners on public forums. We did not write them.
"A 2 month nightmare. The Rust-Oleum kit started peeling in chunks. The foam rollers disintegrated into the paint while I was applying it. I spent more time fixing the mess than if I had just hired someone."
Result: Stripped and hired a professional
"Within a year you will have large chunks of paint peeling if the surface was not properly prepped. The kit does not include the right tools for real surface preparation."
Result: Peeling within 12 months
"DIY epoxy on tile does not last more than a year. We had a contractor tell us straight up that the epoxy in those kits is not designed for wet environments like a shower."
Result: Coating failed in wet areas first
"Reglazed tile, when they scratch they look horrible. The paint underneath shows through and you cannot touch it up without it looking patchy."
Result: Visible damage with no repair option
Why DIY Kits Fail on Bathroom Tiles
Can you fix a failed DIY tile refinishing job?
Yes, but it adds work. The old DIY coating has to be fully sanded off before we can apply our bonding agent and urethane acrylic finish. Depending on how many layers were applied and how badly the surface was damaged, this can add 1 to 2 hours to the job. We fix DIY tile jobs regularly for homeowners across Etobicoke, East York, Oakville, and Pickering.
Types of Tiles We Refinish
The coating bonds differently depending on the tile material. Here is what we refinish, what we do not, and why. Every material listed below has been tested and proven in real bathrooms across Toronto and the GTA.
The most common tile in Toronto bathrooms. Ceramic tiles have a clay body with a factory applied glaze on the surface. The glaze wears down over decades, allowing stains to penetrate the porous clay underneath. We sand through the old glaze with 40 grit, smooth with 150 grit, apply the bonding agent, and coat with urethane acrylic. This is the tile type we refinish most often in homes across Scarborough, North York, and East York.
Most CommonPorcelain is denser and less porous than standard ceramic. The factory glaze on porcelain tiles is harder, which means it takes longer to sand through, but the bonding agent adheres well once the surface is properly prepared. Porcelain wall tiles in shower enclosures and tub surrounds across Mississauga, Brampton, and Vaughan respond well to reglazing. The finished coating is indistinguishable from a new porcelain surface.
Excellent ResultsSubway tiles are a shape, not a material. Most are ceramic or porcelain, and both refinish well. The 3x6 rectangular format common in older Toronto homes, condos in Etobicoke, and rental units across the GTA coats evenly because the flat surface accepts the spray application uniformly. The coating covers the tile face completely, giving the wall a consistent, updated appearance.
Small format mosaic tiles on bathroom walls can be reglazed as long as they are ceramic or porcelain and firmly bonded to the wall. The coating covers the tile faces and creates a uniform colour. Mosaic tiles require more careful masking due to the higher number of edges per square foot, which adds a small amount of prep time. Common in older condos across Richmond Hill, Markham, and Ajax.
Pink, mint green, baby blue, and maroon tiles from the 1950s through 1980s are structurally some of the best tiles ever installed in Toronto homes. The clay bodies are thick and the glaze is durable. The colour is the only problem. One coat of white urethane acrylic covers the original colour completely and turns a dated bathroom into a clean, modern space. This is one of our most requested services across the GTA.
High DemandNatural stone tiles (marble, travertine, slate, and granite) require specialized stone restoration, not a surface coating. Glass tiles do not accept the bonding agent properly. Floor tiles of any material wear through within 1 to 2 years because foot traffic is too abrasive for any applied coating. We are upfront about what works and what does not, because a failed job helps nobody.
Honest LimitsTile Type Quick Reference
| Tile Material | Can We Refinish It? | Surface Prep | Coating | Expected Lifespan |
|---|---|---|---|---|
| Ceramic (wall) | Yes | 40 + 150 grit sanding | Urethane acrylic | 10 to 15 years |
| Porcelain (wall) | Yes | 40 + 150 grit sanding | Urethane acrylic | 10 to 15 years |
| Subway tile | Yes | 40 + 150 grit sanding | Urethane acrylic | 10 to 15 years |
| Mosaic (wall) | Yes | 40 + 150 grit sanding | Urethane acrylic | 10 to 15 years |
| Natural stone | No | Requires specialized stone restoration | ||
| Glass tile | No | Bonding agent does not adhere to glass | ||
| Any floor tile | No | Foot traffic wears through coating in 1 to 2 years | ||
Can you refinish textured or uneven tiles?
It depends on the texture. Tiles with a light orange peel or minor raised pattern coat well because the spray application fills the texture evenly. Heavily textured or hand sculpted tiles with deep grooves do not produce a smooth finish because the coating settles into the valleys unevenly. Send us a photo and Shawn will let you know whether your specific tiles are a good candidate.
How to Care for Your Refinished Tiles
The coating needs 48 hours to fully cure. What you do during that window, and how you clean the tiles afterward, directly affects how long the finish lasts. Follow these instructions and your reglazed tiles will look new for 10 to 15 years.
Do not let water touch the reglazed tile surface for the first 24 hours. No showers, no baths, no wiping with a wet cloth. Water contact during the initial cure weakens the bond between the coating and the tile.
No Water Contact
- No showers or baths
- No wet cloths on the tiles
- No steam from other water sources
- Keep the bathroom door open for air circulation
- Use another bathroom if available
Light Use Only
- Quick showers are fine (under 10 minutes)
- Light hand washing at the sink
- No long hot baths or extended steam
- No cleaning products on the tiles yet
- No scrubbing or wiping the surface
Full Normal Use
- Regular showers and baths
- Normal cleaning with approved products
- Mounting accessories with suction cups
- No abrasive pads or scouring powders ever
- No drill mounted accessories into the coating
Do This
- Clean with a soft cloth or sponge and mild liquid soap
- Rinse the surface after every shower to prevent soap buildup
- Use non abrasive bathroom cleaners only
- Dry the tiles with a towel after cleaning
- Run the exhaust fan during and after every shower
- Use suction cup accessories instead of drilled mounts
- Report any chips or damage early so we can assess warranty coverage
Do Not Do This
- Use abrasive pads, steel wool, or scouring powder on the surface
- Apply bleach, CLR, Lime Away, or drain cleaner directly on the tiles
- Use acetone, nail polish remover, or paint thinner near the coating
- Drill into the reglazed surface for towel bars or shelves
- Let hair dye, strong chemicals, or coloured soaps sit on the surface
- Drop heavy objects like showerheads or glass bottles on the tiles
- Use a steam cleaner directly against the coated surface
Safe Cleaning Products for Reglazed Tiles
| Product | Type | Safe? | Notes |
|---|---|---|---|
| Dawn Dish Soap | Liquid soap | Yes | Best everyday cleaner. A few drops on a soft cloth with warm water. |
| Scrubbing Bubbles (spray) | Bathroom cleaner | Yes | Spray on, let sit 2 minutes, wipe with a soft cloth. No scrubbing needed. |
| Fantastik All Purpose | Multi surface spray | Yes | Good for quick wipe downs between deep cleans. |
| Mr. Clean Magic Eraser | Melamine sponge | Yes (gentle) | Use lightly for scuff marks only. Do not scrub hard or use frequently. |
| Diluted White Vinegar | Natural cleaner | Yes (diluted) | Mix 1 part vinegar to 4 parts water. Do not use undiluted vinegar on the coating. |
What happens if the coating gets scratched or chipped years later?
Small chips and scratches can often be touched up without recoating the entire surface. If the damage occurs within the warranty period, contact Shawn directly and he will assess whether it is covered. Most minor damage from normal use is repairable. Homeowners across Toronto, Scarborough, North York, and Mississauga call us for touch ups and the process takes under an hour.
Tile Reglazing FAQ
Answers to the questions Toronto homeowners, landlords, and property managers ask most about tile reglazing. If your question is not listed here, call Shawn directly at 647-930-2986.
A professionally reglazed tile surface lasts 10 to 15 years with proper care. The urethane acrylic coating we apply is industrial grade, not retail paint. Lifespan depends on cleaning habits, water exposure, and following the aftercare instructions we provide after every job. Homeowners across Toronto, Scarborough, and Mississauga who follow the care guide consistently get the full lifespan from their coating.
We apply a standard white finish, which is the most requested colour for bathroom tile reglazing in Toronto. White brightens the bathroom, photographs well for real estate listings, and matches any decor. This is the same China White finish used on our bathtub and sink reglazing jobs. It covers dated colours like pink, mint green, baby blue, and maroon completely in one coat.
Yes. Once the coating has fully cured after 48 hours, the surface is completely inert and safe for children, pets, and anyone in the household. During the application, we ventilate the bathroom and the coating off gasses while it cures. We recommend keeping children and pets away from the bathroom for the first 48 hours. After that, the surface is safe for daily contact.
There is a noticeable odour during the application and for a few hours afterward. The urethane acrylic coating produces fumes while it is being sprayed and as it begins to cure. Shawn ventilates the bathroom during the job and recommends keeping the bathroom door open and running the exhaust fan for the first 24 hours. By the time the 48 hour cure is complete, the odour is gone.
Remove all personal items from the shower, tub surround, and any wall surfaces being reglazed. Take down shower curtains, caddies, suction cup accessories, and anything mounted to the tile. Clear the floor area around the work zone so Shawn has room to set up. Everything else, including masking, surface prep, and cleanup, is handled on site.
Send us a photo of the tiles you want refinished. Shawn will review the photos and reply with a fixed price quote, usually within a few hours. No in person inspection is needed for most tile jobs. The price you are quoted is the price you pay. No hourly rates, no surprise fees, no add ons. Call 647-930-2986 or visit our contact page to send your photos.
Still Have a Question?
Send a photo of your tiles and Shawn will reply with a fixed price quote and answers to any questions about your specific bathroom.
Tile Reglazing Across Toronto and the GTA
Shawn provides tile reglazing to homeowners, landlords, and property managers across the Greater Toronto Area. Same pricing, same process, same 5 year warranty at every location. No travel fees within our standard service area.
Our home base. We reglaze bathroom tiles in houses, condos, and apartment buildings across all Toronto neighbourhoods.
One of our busiest areas. Many 1960s and 1970s homes across Scarborough have original bathroom tiles that are structurally solid but visually dated.
A mix of older bungalows and newer condos. Landlords along the Yonge corridor and property managers in Willowdale book tile reglazing for unit turnovers regularly.
From older split levels in New Toronto to condo towers in Humber Bay, Etobicoke bathrooms range from vintage pink tile to early 2000s builder grade ceramic. Both reglaze well.
Post war bungalows and side splits with original 1950s and 1960s tile are common across East York. The tiles are built to last. They just need a fresh surface.
Peel Region is one of our fastest growing service areas. Property managers and homeowners across Mississauga and Brampton book tile reglazing to refresh bathrooms without the cost of a full renovation.
York Region homes from the 1980s and 1990s often have large tiled tub surrounds in earth tones that date the bathroom. One coat of white makes them look current again.
Durham Region is on the eastern edge of our service area. Older homes in Pickering and Ajax have the same 1970s tile found across Scarborough. Same materials, same results, same warranty.
Halton Region is on the western edge of our coverage. Homeowners in Oakville and Burlington who want a quick bathroom refresh without a full renovation book tile reglazing as a cost effective alternative.
Locations outside the areas listed above may be available on request. Call Shawn at 647-930-2986 to confirm coverage and scheduling for your area.
Ready to Refresh Your Bathroom Tiles?
Send a photo and get a fixed price quote. Same day responses for most requests. No in person inspection needed.