4.9 Google Rating • 1,000+ Tubs
EXPERT LAWN CARE SERVICES IN AUGUSTA, GA
Own the best lawn on your block in Augusta you’ll love showing off
Tired of patchy grass and weeds? Get lawn care from Augusta experts who know your soil, use top-grade products, and hassle-free service.
4.9 Google Rating • 1,000+ Tubs
Bathtub Repair Toronto
Chips, Cracks, Rust Spots and Surface Damage Fixed in One Visit
That chip next to your drain is not just ugly. Water gets underneath, rust spreads, and a $250 repair turns into a $4,000 replacement. We fix bathtub damage at your home in Scarborough and across the GTA. No demolition, no plumber, no days without a bathroom. Most repairs done in a single visit with a durable urethane acrylic finish that lasts 10 to 15 years.
Does Your Bathtub Need Repair?
Most bathtub damage starts small. A chip near the drain, a hairline crack along the rim, a rust stain that keeps coming back no matter how much you scrub. Left alone, every one of these gets worse. Toronto's hard water speeds up corrosion, and Ontario's older homes with cast iron and porcelain over steel tubs are especially vulnerable. Here is how to tell what you are dealing with.
A dropped shampoo bottle or shower head hitting the tub surface creates chips that expose the raw material underneath. On porcelain over steel and cast iron bathtubs, that exposed spot starts rusting within weeks. We see this constantly in Toronto homes built in the 1950s through 1980s with original cast iron tubs. One chip left for a few months turns into a rust ring the size of your palm. The fix is straightforward if you catch it early.
Cracks happen from impact, temperature changes, or foundation settling in older Scarborough, Etobicoke, and North York homes. Hairline cracks look minor but they let water reach the substrate. On fiberglass and acrylic tubs, cracks spider outward over time. On porcelain over steel, they let moisture reach the metal and rust forms underneath where you cannot see it. We have pulled tubs in East York where the entire underside was corroded from one untreated crack.
Orange and brown rust stains around the drain, overflow plate, or near existing chips mean water has reached the metal underneath the enamel. Toronto's municipal water is hard, which accelerates this. Scrubbing with Comet, Ajax, or Vim makes it worse because those abrasives strip more of the protective surface away. If the rust is only on the surface, professional repair works. If the steel has rusted through and the tub floor flexes when you step on it, that is structural damage and repair will not hold.
Peeling almost always means a previous refinish or DIY paint job failed. The coating was applied over a surface that was not properly prepared, or cheap epoxy paint was used instead of professional urethane acrylic. We fix these every week across Toronto. One common complaint we hear: "the finish started to peel within the year" after a discount reglazer did the work. A failed coating can be stripped, the surface properly sanded with 40 and 150 grit, and recoated the right way.
Years of abrasive cleaners strip the gloss finish off bathtubs. The surface becomes rough, holds stains, and feels gritty underfoot. Yellow or grey discoloration on white porcelain tubs is chemical damage from bleach and scouring powders. This is the most common damage type in rental units and older Toronto apartments where tenants have used harsh products for years. It is purely cosmetic and responds well to professional resurfacing.
Suction cup bath mats are the number one cause of surface damage on reglazed bathtubs. The suction cups create a vacuum seal, and when you pull the mat up, the coating comes with it. Metal cleaning tools and dragging items across the tub create scratches that trap dirt and bacteria. Light scratches are cosmetic. Deeper ones that catch your fingernail have broken through the finish and will collect grime no matter how often you clean.
How do I know if my bathtub can be repaired or needs to be replaced?
Most bathtub damage is repairable. Chips, cracks, rust spots, scratches, peeling from a failed refinish, and surface discoloration can all be fixed professionally. The only time replacement is necessary is when the tub has rusted completely through the metal and the floor flexes under your weight, or when a fiberglass tub has structural cracks that have weakened the basin itself. About 9 out of 10 damaged bathtubs we inspect across Toronto and the GTA are good candidates for professional repair rather than full replacement.
Why did my bathtub repair start peeling or cracking again?
The most common reason is poor surface preparation. If the old surface was not properly sanded before coating, the new finish has nothing to bond to. We see this with discount reglazers who skip steps and with DIY kits that come with inadequate prep instructions. Another cause is coating over unfilled chips. The chip stays hollow under the new finish and the coating cracks right over it. Proper bathtub repair means filling every chip, sanding with 40 and 150 grit, and applying urethane acrylic that bonds to a properly prepared surface.
Is it worth repairing a small chip or should I wait until there is more damage?
Fix it now. A small chip costs far less to repair than a large rusted area. Once a chip exposes the substrate, water gets underneath every time you use the tub. On steel and cast iron bathtubs, rust starts spreading within weeks. We regularly see Toronto homeowners who waited six months on a small chip and ended up needing full reglazing because the rust had spread across a section of the tub floor. Early chip repair is the cheapest and easiest fix in bathtub restoration.
Not Sure What Kind of Damage You Have?
Send us a photo and we will tell you exactly what is wrong and what it will cost to fix it. No guesswork.
What We Repair
We fix bathtub damage that most homeowners think means replacement. Whether it is a single chip from a dropped bottle or an entire tub that a previous contractor botched, we have seen it and fixed it. Every repair uses professional urethane acrylic over properly prepared surfaces. No shortcuts, no cheap epoxy, no spray paint.
Not sure what type of damage you have? Check our damage guide above ↑Chip and Ding Repair
Single chips, multiple dings, and impact damage on all tub types
Small chips from impact damage are the most common bathtub repair we do across Toronto and the GTA. We fill each chip individually, sand the area with 40 and 150 grit, and coat it with urethane acrylic that bonds to the surrounding surface. The repaired area blends with the rest of the tub. Most chip repairs on porcelain, porcelain over steel, and cast iron bathtubs are done in a single visit. We handle everything from one small ding to tubs with a dozen chips that have been ignored for years.
Need full reglazing instead? View our reglazing service →Crack and Fracture Repair
Hairline cracks, stress fractures, and impact splits
Hairline cracks and stress fractures on porcelain, fiberglass, and acrylic bathtubs. We clean out the crack, fill it with a bonding compound, sand it flush, and refinish over it so the repair is invisible. Common in older Scarborough, North York, and Etobicoke homes where foundation settling puts stress on tubs. If the crack is structural and the tub flexes when you stand in it, we will tell you honestly that repair will not hold and you need replacement. We do not take money for jobs that will not last.
When does repair make sense vs replacement? →Rust Spot Treatment and Repair
Surface rust, drain corrosion, and rust bleeding through enamel
Rust around the drain, overflow plate, or where chips have exposed the steel or cast iron underneath the enamel. We grind out the rust down to clean metal, treat the area with a rust inhibitor, fill it, and coat it with urethane acrylic. This stops the corrosion from spreading further. Toronto's hard municipal water accelerates rust on exposed metal, which is why we see so many rust jobs in homes with original 1960s and 1970s steel bathtubs. If the rust has eaten through the metal and the tub floor is soft, we will let you know before we start any work.
Peeling and Failed Refinish Repair
Fixing botched reglaze jobs, DIY paint failures, and delaminating coatings
Previous reglazing job peeling? DIY bathtub paint kit flaking off after a few months? We strip the failed coating completely, sand the original surface with 40 and 150 grit, and recoat with professional urethane acrylic. This is one of our most requested services in Toronto. We fix other companies' work every week. Common complaints from customers who come to us: "the finish started to peel within the year," "the chip was not filled, he just glazed over it and the whole thing was bubbles," and "the same crack opened up again." Proper surface preparation is the difference.
See how repair costs compare to replacement →Surface Scratch Repair
Scratches from bath mats, metal tools, and daily wear
Scratches from suction cup bath mats, metal cleaning tools, or everyday wear and tear. We fill deeper scratches, sand the surface smooth, and refinish the affected area with urethane acrylic. Light scratches get buffed and recoated. The result is a smooth, glossy finish that feels new underfoot. Suction cup mats are the number one cause of surface damage on previously reglazed bathtubs in Toronto. We always recommend switching to a draped rubber mat or adhesive grip strips after any repair or reglazing work.
Read our aftercare guide to prevent future damage →Discoloration and Stain Removal
Yellowing, grey buildup, hard water stains, and chemical damage
Yellow, grey, or brown discoloration from years of abrasive cleaners like Comet, Ajax, and Vim, or from bleach and Toronto's hard water mineral buildup. We resurface the entire tub with a fresh China White urethane acrylic finish that covers the old staining completely. This is the fastest way to make a tired looking bathtub look brand new again. Most common in rental properties and older Toronto apartments where harsh cleaning products have been used for years. One coat of automotive paste wax annually keeps the new finish glossy for 10 to 15 years.
- Bathtubs where the steel or cast iron has rusted completely through and the floor flexes under your weight. That is structural failure and no coating will fix it. We will tell you on site before any work starts.
- Custom colour matching. Our finish is China White, which is the standard white that matches about 95% of bathtubs in Toronto homes. If you need an exact colour match to a non standard tub, we are not the right fit.
- Countertop reglazing or refinishing. We focus on bathtubs only. Keeping that focus tight is what lets us do one thing at a high level instead of spreading thin across every bathroom surface.
- Tile, shower surrounds, or shower base refinishing. Our work is the bathtub basin, rim, and interior walls. We can recommend trusted tile professionals in the Greater Toronto Area if you need tile work done alongside the tub repair.
What bathtub materials can you repair?
We repair porcelain, porcelain over steel, porcelain over cast iron, fiberglass, and acrylic bathtubs. These cover virtually every bathtub installed in Toronto homes from the 1940s to today. Cast iron clawfoot tubs, standard alcove tubs, drop in tubs, and freestanding tubs are all serviceable. The repair approach varies by material but the urethane acrylic finish works on all of them. We assess the material type during our free on site estimate.
Can you fix a bathtub that another company already reglazed badly?
Yes, and we do it regularly. Failed reglazing jobs are one of our most common repairs across Toronto. We strip the old coating entirely, sand down to the original surface with 40 and 150 grit, and start fresh with professional urethane acrylic. The key is removing every bit of the old failed finish before applying the new one. Coating over a bad reglaze is exactly how the problem started in the first place.
Do you repair bathtub surrounds and tile along with the tub?
Our focus is the bathtub itself. We repair and refinish the tub basin, rim, and interior walls of the bathtub. We do not repair or reglaze surrounding tile, shower walls, or countertops. If your tile is damaged, we can recommend a tile professional in the GTA who we have worked with before. Keeping our focus on bathtubs is what lets us do that one thing at a high level.
Know What Needs Fixing?
Book your free estimate and we will confirm the repair plan on site before any work starts.
Our Proven Process
How We Repair Your Bathtub in One Visit
Most bathtub damage sits in the coating, not the tub itself. We rebuild the surface layer by layer, right in your bathroom. Here's exactly what happens when Shawn and the team show up at your Toronto home.
Inspection and Surface Assessment
15 to 20 minWe check every inch of the tub before we touch anything. Damage type, coating material, depth of the issue, moisture under peeling areas.
This tells us exactly what prep the surface needs. If you've had a previous refinish that failed — bubbling, peeling, rough patches — we figure out how many layers need to come off before we hit stable material. We also protect your bathroom. Floors get drop cloths, fixtures get taped, and we set up ventilation for proper airflow during coating application. Every Toronto bathroom is different, so this step adapts to what we're working with.
Sanding and Surface Preparation
60 to 90 minThe step that separates a repair that lasts from one that peels in six months. Two rounds of hand sanding, no acid shortcuts.
We sand the entire surface by hand, starting with 40 grit to strip damaged coating and create a rough profile for bonding. Then 150 grit smooths out the scratch pattern and builds a surface the new finish can grip into. No acid etching. Acid shortcuts weaken the bond over time — we've repaired plenty of tubs across the GTA where the previous contractor used acid prep and the finish peeled in sheets. Every chip gets filled, every crack gets sealed, and every rust spot gets treated down to clean material before the first drop of coating goes on. This prep work takes the longest, and it should.
Primer and Bonding Layer
20 to 30 minA bonding primer locks into the sanded surface and gives the topcoat something to grip at a molecular level.
Once the surface is fully prepped — clean, dry, sanded to profile — we apply a bonding primer designed for bathtub substrates. This layer connects the original tub material to the new topcoat. We let it tack properly before moving forward. Skipping primer or rushing dry time is another shortcut that causes callbacks down the road. We don't do callbacks. Homeowners in Scarborough, North York, and across Toronto trust us to do this part right because it's the foundation everything else sits on.
Urethane Acrylic Coating Application
60 to 90 minMultiple thin coats of professional grade urethane acrylic. Thin coats bond tighter, cure evenly, and don't trap air bubbles underneath.
The topcoat is a professional grade urethane acrylic finish — the same coating system used in hotel and property management bathtub restoration across Ontario. We apply multiple thin coats rather than one thick layer. Each coat gets inspected before the next one goes on. The finish color is China White — a clean, bright standard white that matches most Toronto bathroom fixtures and tile surrounds. The result is a smooth, glossy surface that's hard to tell apart from a brand new tub.
Cure Time and Final Walkthrough
15 to 20 minFull visual inspection under work lighting, walkthrough of cure timeline, and aftercare instructions you take with you.
After the final coat, we inspect for even coverage, smooth edges around drain and overflow fittings, and consistent sheen across the whole surface. Then we walk you through the cure timeline: 24 hours before light use, 48 hours before a full bath with standing water. You get a printed aftercare guide so your repair lasts years, not months. Most of our Toronto customers tell us their tub looks better than when the house was built.
Inspection through final coat, done in a single visit. No return trips, no waiting days between coats. You get your bathroom back the same day.
